How To Change Oil In Lawn Mower Without Drain Plug?

A healthy lawn mower requires frequent care and attention, including oil changes. However, it’s not uncommon to come across models that lack an accessible drain stopper, making this seemingly simple task a little more complicated. You may learn to change the oil in a lawnmower without a drain plug with the appropriate instructions and a few basic steps.

We’ll lead you through the procedure in this article, providing clear directions and valuable ideas to help you complete this chore smoothly. Understanding how to replace the oil without a drain plug will provide you with vital skills that will help you keep your equipment working smoothly.

How To Change Oil In Lawn Mower Without Drain Plug?

All lawnmowers, like all machinery, require an oil change after a specific period of use. Lawnmowers require new oil to function correctly and efficiently. As a result, every lawn mower owner must understand how to change the oil in a lawn mower without removing the drain plug.

The five steps below apply exclusively to changing the oil without a drain stopper. If you have this plug, you can use the standard procedure to replace the oil.

1. Get Ready

To avoid burns, ensure your lawn mower is flat, and the engine is excellent before commencing the oil change operation.

2. Find The Oil Fill Tube

Even lawnmowers without a drain plug have an oil fill tube. Find this tube, which is usually located near the engine and is where you add oil.

3. Take Off The Oil Fill Cap

Use a socket or adjustable wrench to loose and remove the oil fill cap. Set it aside in a safe location.

4. Tilt The Lawn Mower

Tilt the lawn mower on its side and position the oil fill tubing over the oil pan. Ensure the air filter side faces up to prevent oil from pouring into the filter.

5. Remove The Old Oil

This step can be done in 2 ways.

a. Siphoning Technique

Siphon the old oil into an oil pan using a clean tube inserted into the oil fill tube. To avoid spillage, use this procedure with caution.

b. Pump For Oil Extraction

An oil extractor pump simplifies and cleans the process. Insert the pump’s tube into the oil fill tube, then use the pump to extract the used oil into an oil pan.

6. Allow Total Drainage

Allow the old oil to drain into the oil pan before proceeding altogether. Please be patient, as this may take a few minutes.

7. Examine And Clean

Examine the oil fill tube and wipe away excess oil using a clean rag or towel. Make sure there are no pollutants or trash.

8. Replace The oil

Pour the recommended type and fresh oil into the oil fill tube using a funnel. For the proper oil kind and quantity, consult your lawn mower’s owner’s manual.

9. Change The Oil Fill Cap

After adding the fresh oil, tightly tighten the oil fill cap onto the tube.

10. Recheck The Oil Level

Start the lawn mower for a few seconds to allow the new oil to circulate. Then, turn it off and recheck the oil level using the dipstick or sight glass (if provided) to ensure it is at the recommended level.

11. Dispose Of Old Oil Properly

Get rid of used oil in a way that doesn’t hurt the earth. Several stores that sell auto parts and salvage groups will take used oil and get rid of it properly.

12. Cleaning

Clean up any spilled oil and ensure the mower and surrounding area are oil-free.

What Equipment Is Required?

  • Wrench socket or adjustable wrench
  • frying pan
  • Funnel
  • Towels or rags
  • fresh oil
  • Pump for extracting oil

What Kind Of Oil Are Lawn Mowers Using?

SAE 30 oil is used in most push mowers and zero-turn lawnmowers. This is a type of oil made specifically for tiny engines. Always use the proper oil in a lawn mower to avoid engine damage. It’s always a good idea to read the owner’s manual for your lawn mower model to make sure you’re using the correct type of oil.

What Is The Lifespan Of Lawn Mower Engine Oil?

The engine oil of a lawnmower usually lasts the entire season. It might be either the spring or summer. However, there is another regulation that you must follow after every 50 hours of use. This means that you should change the engine oil every 50 hours. So, you shift the gasoline after 50 hours of use or after a complete season.

When Should You Change The Oil On Your Lawn Mower Without A Drain Plug?

It is advised that the oil be changed every 25-50 hours of use or at the start of each mowing season. Regular oil changes are essential for keeping the engine in good working order and ensuring peak performance. More regular oil changes may be required if the mower is used often or in dusty circumstances. 

Changing the oil on a lawn mower without a drain plug necessitates ingenuity and precision. Alternative techniques for removing old oil include tilting the mower, using a siphon pump, or utilizing an oil extraction kit. However, safety precautions must be taken, such as ensuring the mower is on level ground, allowing it to cool down, and using appropriate extraction equipment.

Leave a Comment